Influences of electroosmotic flows in nanopillar chips on DNA separation: Experimental results and numerical simulations

The various potential factors affecting the performance of nanopillar chips on DNA separation were investigated from the viewpoints of both numerical calculations and actual experiments. To yield higher performance and replace the conventional DNA separation techniques such as microchip electrophoresis, the phenomenon specific to the nanopillar chips should be deeply understood. In this paper, although various factors affecting the performance of the nanopillar chips are considered, we focused on the effect of electroosmotic flow, which is particularly noticeable in quartz-made nanopillar chips. High-resolution separation of DNA was realized when an electroosmotic flow was suppressed by simply using a higher concentration of buffer, but DNA separation failed in the presence of an electroosmotic flow. It was confirmed from the numerical simulations and the direct observations that the deformation of DNA band during the injection process was induced by electroosmotic flow and consequently led to a poor resolution.     

Development of quasi-end-fired waveguide plastic dye laser

A quasi-end-fire (QEF) pumping scheme was proposed and studied as a novel laser-pumping-scheme for a laser-dye-doped plastic waveguide laser with distributed feedback. This pumping scheme resembled longitudinal pumping, but also has the advantage of controllable absorption length of the injected pump beam. A first demonstration of the QEF was performed and the pumping beam controlling was also investigated.     

Structural Distortion and Compositional Gradients Adjacent to Epitaxial LiMn2O4 Thin Film Interfaces

Thin film electrode materials are key components in the development of high rate, high capacity solid‐state Li‐ion batteries. Detailed knowledge of the epitaxial film/substrate(current‐collector) interface structures, which provides insights into epitaxial growth mechanisms and the effects of microstructure on electrochemical properties, is essential for efficient materials and device design. Here we report the epitaxial growth mechanism of a typical cathodic LiMn₂O₄ thin film by exploring the detailed structural and compositional variations in the vicinity of a film/substrate interface using state‐of‐the‐art scanning transmission electron microscopy. Direct observation of atom columns shows the epitaxial film forms an atomically flat and coherent heterointerface with the substrate, but that the crystal lattice is tetragonally distorted with a measurable compositional gradient from the interface to the crystal bulk. The growth mechanism is interpreted in terms of a combination of chemical and physicomechanical effects, namely a complex interplay between the internal Jahn‐Teller distortions induced by oxygen non‐stoichiometry and the lattice misfit strain.     

Control of the coating layer thickness of TiO2–SiO2 core–shell hybrid particles by liquid phase deposition

This paper describes control of the coating layer thickness and the crystallite size of the core–shell hybrid particles by controlling the process parameter. The core–shell hybrid particles were prepared using liquid phase deposition (LPD). We confirmed that the homogeneous coating was attained from the result of the zeta potential and the transmission electron microscope (TEM) observation. Furthermore, the coating layer microstructure was estimated using Brunauer–Emmett–Teller (BET) method. The obtained coating layer of titania was estimated using the band gap energy. Results indicate that the blue shift of the band gap energy signifies that the physical property of the hybrid particles was controlled by the coating layer thickness and the crystallite size, which are determined by the processing parameters.     

Lactic acid bacteria isolated from ethnic preserved meat products of the Western Himalayas

We used culture- and molecular-biology-based methods to investigate the diversity of lactic acid bacteria (LAB) in the ethnic chevon (goat) meat products chartayshya, jamma and arjia of the Western Himalayas. In six chartayshya, six jamma and four arjia samples, LAB were the predominant microbial component involved in the fermentation of these samples, and the total LAB population in arjia (7.8 ± 0.1 log cfu g⁻¹; mean ± SD) was significantly higher (P < 0.05) than in chartayshya (6.9 ± 0.1 log cfu g⁻¹) and jamma (7.5 ± 0.1 log cfu g⁻¹). We identified 53 LAB samples by 16S rRNA and phenylalanyl-tRNA synthase (pheS) genes sequencing. The LAB isolates were identified as Enterococcus durans, Enterococcus faecalis, Enterococcus faecium, Enterococcus hirae, Leuconostoc citreum, Leuconostoc mesenteroides, Pediococcus pentosaceus, and Weissella cibaria. These results revealed that there is a high level of diversity of LAB in the Himalayan ethnic preserved meat products.     

Differential diagnosis of pulmonary tuberculosis

Differential diagnosis of pulmonary tuberculosis is discussed. Chest X-ray findings of pulmonary tuberculosis may be greatly varied, because tuberculosis may cause three different lesions: an exudative lesion, a proliferative lesion, and a fibrotic lesion, and because it may invade all the structure. Thus, the differential diagnosis of pulmonary tuberculosis includes very many diseases. The most important differential diagnosis of nodule is tuberculoma and lung cancer. The clue of the diagnosis is the feature of the nodule and surrounding structure, such as pleural indentation, or knotching. There is, however, the limitation of the diagnosis by imaging: some tuberculoma may show the identical feature with the pulmonary adenocarcinoma. It is important to gather the pathological or bacteriological evidences by means of suitable procedures.     

EXOS-D (AKEBONO) very low frequency plasma wave instruments (VLF)

The Akebono (EXOS-D) satellite has been successfully observing the Earth's magnetosphere since it was launched on February 21, 1989. The objectives of VLF instruments on board the satellite were to investigate the behavior of plasma waves associated with accelerated auroral particles, wave-particle interaction mechanisms, and propagation characteristics of whistler-mode waves in the magnetosphere. The instruments measured not only the dynamic spectra of VLF waves up to 15 kHz by a wideband receiver, but also their absolute field intensities, wave normal vectors, and Poynting vectors. Two electric and three magnetic components with a bandwidth of about 50 Hz up to 12.5 kHz are sent to measure the wave normal vectors and Poynting vectors. The antenna impedance is measured to determine the correct absolute electric field intensities. The instruments have successfully measured the wave spectra, the wave normal vectors. Poynting vectors, the precise wave intensities, the antenna impedance, etc. The present paper describes the unique features of the instruments, especially the Poynting flux analyzers in more detail. Obtained scientific results are also reviewed     

Enhancement of human parainfluenza virus-induced cell fusion by pradimicin, a low molecular weight mannose-binding antibiotic

Oligosaccharides, especially mannose residues, expressed on the cell surface, are thought to be important for virus-induced membrane fusion. We examined the effect of mannose-binding compounds, pradimicin derivative BMY-28,864 (PRM) and concanavalin A (Con A), on cell fusion of human parainfluenza type 2 virus (hPIV2)-infected HeLa cells. Syncytium formation of hPIV2-infected HeLa cells was suppressed in the presence of Con A. On the other hand, PRM enhanced cell fusion of hPIV2-infected HeLa cells. These effects were blocked by addition of mannose-rich mannan. However, PRM shows little effect on virus growth and the expression of viral glycoproteins on the cell surface in hPIV2-infected HeLa cells. Fluorescein-isothiocyanate-labeled pradimicin and Con A bound to both uninfected and hPIV2-infected mononuclear cells, indicating that these compounds have an affinity to several cellular component(s). In contrast to Con A, PRM had little affinity to the viral glycoproteins. It is inferred from these results that the enhancement of hPIV2-induced cell fusion is probably due to the interaction between PRM and cellular component(s).     

Tandem-crosspoint ATM switch with input and output buffers

This letter proposes a high-speed input and output buffering asynchronous transfer mode (ATM) switch, named the tandem-crosspoint (TDXP) switch, The TDXP switch consists of multiple crossbar switch planes, which are connected in tandem at every crosspoint. The TDXP switch does not increase the internal line speed in eliminating head-of-line (HOL) blocking. In addition, since the TDXP switch employs a simple cell reading algorithm at the input buffer in order to retain the cell sequence, the TDXP switch does not require the cell sequences to be rebuilt at output buffers using time stamps, as is required by a parallel switch. It is shown that the TDXP switch can eliminate the HOL blocking effectively and achieve high throughput